Custom Door Solutions for Residential and Commercial Applications.

Home About Us Gallery Products Contact Us

Commercial Door & Specialties, Inc ©  

Terms and Conditions

 

l

Since 1997, commercial and residential contractors have chosen Commercial Door & Specialties for their doors, frames and hardware needs.

110 years of combined experience gives us in-depth knowledge and capability to provide expert craftsmanship and also skilled installation if needed.

We pride ourselves on doing unique “one of a kind” products in our solid lumber Custom Stile and Rail and Flush doors.

Commercial Door & Specialties, Inc.
2525 Dyess Ave.; Rapid City, SD 57701 USA

Phone: (605) 341-8667

Fax: (605) 341-7905

Email: info@commercialdoorinc.com


Loading...


Job Specifications: Stile & Rail Wood Doors



Custom Stile and Rail Interior Door by Commercial Door & Specialties, Inc.

1) Specie & Cut for this Project:  Plain Slice Red Oak

2) Glass & Glazing for this Project: Low E 1” Insulated Glass-Tempered

3) Panel Stile for This Project:  Flat Panel or Raised Panel

4) Finish for this Project:

Stain color:  Either Specify a Manufacturers Stain or to Match Existing

                 Top Coat:  Gemini PUR 0530 Polyurethane, Minimum 2 Mil.

5) Construction: All Stile and rail doors and wood frames manufactured by Commercial Door & Specialties, Inc. are manufactured using solid lumber only.

a) Interior Frames- ¾” Jamb with 7/16” or ½” door stop. (1 3/16” or 1 ½” overall thickness) None required

b) Exterior Frames- 1 1/2” Jamb with ½” door stop. ( 1 3/4” overall thickness) None required

c) Interior Stile and Rail Doors: 1 3/8” & 1 ¾” typical- (other thicknesses are available) (minimum of 2 layer construction)

d) Exterior Stile and Rail: 1 ¾” Typical at 7-0 height - (other thicknesses are available) (minimum of 3 layer construction)

          (Typical ¾” + ¼” + ¾” lay up) N/A

e) Exterior Stile and Rail: 2” Typical at 8-0 height - (other thicknesses are available) (minimum of 3 layer construction)

          (Typical ¾” + ½” + ¾” lay up) N/A

f) Exterior Stile and Rail: 2 1/4” Typical at 9-0 height - (other thicknesses are available) (minimum of 3 layer construction)

          (Typical ¾” + ¾” + ¾” lay up) N/A

g) Multi-layer construction is utilized to minimize warping characteristics of wood.

h) Joinery:  Mortise joint and tenon will be used at Mission, Square and Shaker style doors.

i) Joinery:  Male & Female profiles will be joint glued at Ovolo, Quarter Round and Roman Ogee style doors.

6) Grain Direction:   Top Rail: Horizontal

           Horizontal Muntins:  Horizontal

     Lock Rail: Horizontal

            Bottom Rail:  Horizontal

                            Hinge Stile:   Vertical

                              Lock Stile:   Vertical

                   Vertical Muntins:   Vertical

            Door Face:   Vertical

    Panels: Qty     

7) Panel Type:  (Flat or raised):  Raised

                        Panel Thickness:  1 ½”

                             Panel Layers: 2

                 Raised Panel Profile:  Standard Raised

8) Exterior & Interior Doors & Frames: Solid Lumber- Exterior Waterproof Glue

a) Titebond III waterproof Glue typical (Red Oak, White Oak Natural Birch, White Birch, Maple, Fir, Alder, Beech)

b) For Tropical High Oil Woods (Cedar, Rosewood etc – Franklin International Polyurethane Glue will be used (N/A this project).

       9) Warranty:  2 Year Product replacement warranty.


                 Franklin International: Tite Bond III Glue

Physical Properties (Typical)    Type Advanced Proprietary Polymer    Calculated VOC: 5.6 g/L  State Liquid

Weight/gallon 9.22 lbs   ColorTan  Chalk temperature* Approx. 47°F  Dried film Light brown  Flashpoint >200°F.

Solids 52%   Freeze/thaw stability Stable   Viscosity  4,200 cps  pH 2.5  

Storage life 12 months in tightly closed containers below 75°F.

*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.  

 Application Guidelines Application temperature Above 47°F.   Open assembly time 10 minutes (70°F./50% RH)
Total assembly time20-25minutes (70°F./50%RH)  Minimum required spreadApproximately 6 mils or 250 square feet per gallon
Required clamping pressure Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Methods of application Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.   Patent Pending

 Bond Strength ASTM D-905    (On Hard Maple)  Temperature: Room Temperature     Strength psi: 4000      57 % Wood Failure

Product Features    Passes ANSI/HPVA Type I water-resistance       Waterproof formula that cleans up with water

 Superior strength - Strong initial tack                     Designed for interior and exterior applications

 Longer open assembly time                            Lower application temperature

 Unaffected by finishes